膠槍的使用方法及不同的分類！
膠槍是一種涂膠(或擠膠)工具，可在需要涂膠的地方使用。廣泛應用于建筑裝飾等行業。
Glue gun is a gluing (or extruding) tool, which can be used where gluing is needed. It is widely used in architectural decoration and other industries.
膠槍分類
Glue gun classification
一、
膠槍從力的分類
Classification of glue gun force
手動膠槍、氣動膠槍、電動膠槍
Manual glue gun, pneumatic glue gun and electric glue gun
手動涂膠槍:操作者手動壓板，實現涂膠。涂膠效率低。它是為不經常使用它的家庭設計的。
Manual gluing gun: the operator manually presses the pressure plate to realize gluing. Low gluing efficiency. It is designed for families that don't use it often.
氣動膠槍:需要連接壓縮氣源，空氣推動膠底實現上膠。一般工廠的生產線都配備有壓縮氣源(從工廠的空氣壓縮站或空壓機通過空氣管道)。單支氣動膠槍耗氣量小。如果沒有壓縮氣源，可以用小型空壓機(俗稱氣泵)工作。目前市場上的高品質氣動膠槍都配備了噪聲小于70dB的消聲器。適用于需要安靜的室內工作場所。還可以調節氣壓，更好的控制出膠量。
Pneumatic glue gun: it is necessary to connect the compressed air source and push the rubber base with air to realize glue application. Generally, the production line of the factory is equipped with compressed air source (from the air compression station or air compressor of the factory through the air pipeline). The air consumption of a single pneumatic glue gun is small. If there is no compressed air source, you can use a small air compressor (commonly known as air pump) to work. At present, the high-quality pneumatic glue guns on the market are equipped with silencers with noise less than 70dB. It is suitable for indoor workplaces that need quiet. It can also adjust the air pressure to better control the glue output.
電動膠槍:電動膠槍由充電電池供電，配有充電器和充電電池。市場上好的電動膠槍電池1小時即可充滿電，充滿電后可涂30-45膠，可輕松完成大量涂膠工作。
Electric glue gun: the electric glue gun is powered by rechargeable battery, equipped with charger and rechargeable battery. The battery of a good electric glue gun on the market can be fully charged in 1 hour. After being fully charged, it can be coated with 30-45 glue, which can easily complete a large number of gluing work.
二、
膠槍屬于膠水的包裝形式
Glue gun belongs to the packaging form of glue
單組份和雙組份
One component and two component
單組份:顧名思義，即只有一種膠水的膠槍?？捎糜谕把b、香腸包裝、散裝包裝。
Single component: as the name suggests, that is, a glue gun with only one kind of glue. It can be used for barrel packaging, sausage packaging and bulk packaging.
墨盒包裝(俗稱硬包裝，這是指用膠包裝的硬塑料管或類似彈藥筒。五金店出售的玻璃膠一般都是310ML墨盒包裝)，規格有310/400ml，其中310ML較為常見。
Cartridge packaging (commonly known as hard packaging, which refers to the hard plastic tube or similar cartridge packaged with glue. The glass glue sold in hardware stores is generally packaged with 310ML cartridge), with a specification of 310 / 400ml, of which 310ML is more common.
臘腸裝(俗稱軟包裝，即塑料包裝為軟塑料袋或類似香腸的類型)，規格有310/400/600ml，以600ml較為常見。
Sausage packaging (commonly known as soft packaging, i.e. plastic packaging is the type of soft plastic bag or similar sausage), with specifications of 310 / 400 / 600ml, and 600ml is more common.
雙組份:一支膠槍，可同時涂?jī)煞N膠水。隨著材料技術的發展，雙組份膠粘劑的應用越來越廣泛。適用于多比例膠筒，從小容量到大容量。如:300ml+150ml(2:1)雙膠缸、兩個200ml分離膠缸、軸向膠缸(俗稱大缸配小缸)等。滿足各種行業的需求，并與各種膠筒結構完全兼容。
Two component: one glue gun, which can apply two kinds of glue at the same time. With the development of material technology, two-component adhesives are more and more widely used. Suitable for multi proportion rubber cylinder, from small capacity to large capacity. Such as: 300ml + 150ml (2:1) double rubber cylinder, two 200ml separated rubber cylinders, axial rubber cylinder (commonly known as large cylinder with small cylinder), etc. It meets the needs of various industries and is fully compatible with various rubber cylinder structures.
上一篇：PUR熱熔膠機換膠時應注意什么?
下一篇：中空玻璃生產線中的板壓和棍壓哪種好？
