選用濟南雙份打膠機需要考慮哪些問題?
為了適應不同的需求，市場上的打膠機種類多樣，而雙液打膠機是目前應用較為廣泛的設備，在較多行業中都會有所應用，哪選用雙液打膠機需要考慮什么問題？
In order to adapt to different needs, there are various types of glue applicators in the market, and the double liquid gluing machine is currently widely used equipment, which will be used in many industries. What problems should be considered when selecting the double liquid glue machine?
AB環氧樹脂、AB聚氨酯、AB有機硅等這些膠水都是十分常用，對于使用雙液混合點膠粘結效果的需求，選用雙液打膠機能比普通打膠機實現更好的效果，雙液打膠機能夠根據不同的混合膠水比例可以很好的把握膠水的固化時間，從而更利于產線生產的需要！
AB epoxy resin, AB polyurethane, AB silicone and other glues are very commonly used. For the need of using the two-liquid mixing dispensing adhesive effect, the double-liquid gluing machine can achieve better results than the ordinary one. The two-liquid glue applicator can grasp the curing time of glue according to the different proportion of mixed glue, which is more conducive to the needs of production line production!
選用雙液打膠機需要考慮的問題：
The problems to be considered in the selection of double liquid glue applicator are as follows:
所用膠水的混合比例：任何一種打膠機對膠水的混合比例都有一個范圍，常見的有100：100——100：10；如果所用的膠水不在這個范圍，那就要重新考慮了。
Mixing ratio of glue used: there is a range for the mixing ratio of glue for any glue applicator, which is usually 100:100-100:10; if the glue used is not in this range, it needs to be reconsidered.
濟南雙組份打膠機
Jinan two component gluing machine
膠水里面有沒有填料：雙液灌膠機控制出膠量的方式有兩種，一種是通過齒輪泵，一種是通過螺桿泵！齒輪泵在遇到含有填料的膠水時，時間久了易磨損，進而造成出膠量不準，混合比例不精準，出現點出來的產品長時間不干。螺桿泵相比較而言，較耐磨損一些，這些都是根據需求進行選擇！
Whether there are fillers in the glue: there are two ways to control the glue output of the double liquid glue filling machine, one is through the gear pump, the other is through the screw pump! Gear pump in the presence of filler glue, for a long time easy to wear, resulting in inaccurate glue output, mixing ratio is not accurate, point out the product does not dry for a long time. Screw pump in comparison, more wear-resistant some, these are based on demand for selection!
產品點膠需求：要考慮產品每次限制小的點膠量是多少，比如要點的產品是1克，膠水配比是10：1，那相當于B膠的出膠量要達到0.1克，機器的限制小出膠量是多少，你買機器時就要對比比較，看能否達到要求！
Product dispensing demand: to consider the product limit each time the small amount of dispensing is, for example, the key product is 1g, the glue ratio is 10:1, which is equivalent to the glue output of glue B to reach 0.1g, the machine limit is small, how much is the glue, you should compare and compare when you buy the machine, to see if you can meet the requirements!
產量效率：生產量大的話可考慮帶XYZ機械手，或者多頭的打膠機，雖然這樣的設備更高，但是亦都能夠帶來更好的效率。生產量小的話，用單頭打膠機，甚不帶XYZ機械手的都可完成！
Production efficiency: if the production volume is large, you can consider the XYZ manipulator or multi head gluing machine. Although the price of such equipment is higher, it can also bring better efficiency. If the production volume is small, it can be completed with single head gluing machine or even without XYZ manipulator!
上一篇：中空玻璃生產加工的質量的取決于什么?
下一篇：濟南雙組份打膠機日常如何進行維護？
