液體泡沫對于打膠機有什么影響？
液體泡沫的一個主要影響因素膠的質量,如果你能保證在配藥行業,沒有膠水的問題,它可以保證數量和質量的鋰電池包裝,沒有液體泡沫,當然,我們在系統中一直致力于追求,希望有的產量沒有任何膠水點膠機。
The main factor of the liquid foam is the quality of the glue. If you can guarantee that there is no glue problem in the dispensing industry, it can guarantee the quantity and quality of the lithium battery packaging, no liquid foam, and of course, we have been pursuing in the system, hoping that one day's output will not have any glue dispensing machine.
什么是封裝
What is encapsulation
封裝是當?shù)匾粋€密封或粘合劑,讓外部的東西,這是封裝、信道分配機用于鋰電池可以避免電池漏液包裝,也會使電池壽命更長,前提是不能出現液體泡沫,否則會導致鋰電池爆破,經常出現一次電池爆炸的原因。
Encapsulation is a local seal or adhesive, so that external things, which are encapsulated, channel distribution machine for lithium batteries can avoid battery leakage packing, and also make the battery life longer. The premise is that no liquid foam can occur, otherwise it will lead to lithium battery explosion, and there is often a battery explosion.
第二，分配機制
Secondly, distribution mechanism
通道配藥機是我們的系統開發的中、塑料設備,全部采用不銹鋼機身,每一個角落切機、研磨機的方法,看似普通,實際上使用大量的技術,為什么一些配藥機買更貴,這是原因,使用技術,能夠在完成作業也是非常高的,完成鋰電池封裝后可選擇通道分配器進行生產。
Channel dispensing machine is our system development of medium and high-end plastic equipment, all using stainless steel fuselage, every corner of the cutting machine, grinding machine method, seemingly ordinary, in fact, the use of a large number of high-end technology, why some dispensing machine is more expensive, this is the reason, the use of high-end technology, can complete the operation is also very high. After lithium battery packaging, channel distributor can be selected for production.
第三，液泡對配藥的影響
Thirdly, the effect of vacuoles on dispensing
液體泡沫會影響膠的量的大小,通常在通道調劑調劑前將機器在一個恒定的程序設計好膠的時刻,如果有泡沫,膠水的量將會改變,在鋰電池包裝不會有膠水,和跟蹤變化將導致產品缺陷,如何處理?，將分配器的管膠全部取出，然后采用離心攪拌的方法，這是一種很好的處理方法。
Liquid foam will affect the size of the glue. Usually when the machine is in a constant program before the channel is dispensed, the amount of glue will change. If there is a foam, there will be no glue in the lithium battery pack, and tracking changes will lead to product defects and how to deal with it. First, remove all the tube glue from the distributor. Then centrifugal stirring method is used, which is a good treatment method.
這些都是給你的，希望對你有幫助。
These are for you. I hope they will help you.
上一篇：雙組份打膠機使用過程中遵循的規定
下一篇：雙組份打膠機更常見問題的處理方法
